Combined Telescopic forks

BELT SYSTEM with Telescopic Fork LHD Group Load Handling Devices

BELT System

Belt System with Telescopic fork, Single depth - MINILOAD Load up to 100 Kg (220 Lb) Designed for backing up the Telescopic forks, the lateral belt conveyor allows moving the loads onboard simultaneously. The fork set can pick up the load from the shelf, and then the BELT SYSTEM can lay it down in the unloading bay with no further need of telescopic stroke. The number of belts can be redoubled, thus making it even more flexible and versatile - it can also handle a double load onboard. Therefore, it’s possible to halve the operation time by handling two loads at once.  The same system can involve chains instead of belts, for handling way bigger loads with the same benefits. Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. All LHD Group’s telescopic forks undergo accurate run tests and quality checks before delivery.


Lift – Load up to 1000 Kg Being normally employed onboard a shuttle or AGV, this equipment allows the fork group to get the load released in the picking phase. Usually the standard lifting height is 100 mm; nevertheless, it`s possible to adjust it according to the customer`s needs. The lifting equipment is operated through a conveniently powered leverage system and roll chains with tensioners. This equipment is more powerful than precise, and it`s fit for applications that need high repeatability and frequent work cycles rather than a great precision of the movement. Because of its chain transmission, it`s more affordable as for the price, but it requires more maintenance than the gear lift.


Lift –  1000 Kg 通常货叉为水平运动,有时在提升(Z轴)方向亦需要运动. 此款机构确保了货物存取应有的功率,精度及可靠度. 稳定是此款设备的最强要点.标准提升高度为100mm.但也可以根据客户调整设计.


提升货叉 – 负载 2000 Kg 比Gear Lift 1000负载更大, 此设备叉取重载货物, 通过更强健的结构确保精度和可靠度. 基于高精度机械参数设计, 此款提升货叉误差小,生命周期. 提升叉 GEAR LIFT 2000尤其适用于周转频率高, 精度要求高的工况.


Telescopic fork with adjustable inter-axis system In many automated warehouses, due to productive reasons, the handling of different types of loads (and thus of different containers) may be needed. With a set of forks having fixed inter-axis, the handling of only one specific kind of loads is allowed. Instead, it`s possible to handle different kinds of loads by installing under the fork set an ADJUSTABLE INTER-AXIS SYSTEM. It`s a relatively simple system that makes the stocking operation more flexible and versatile. A motor operates a system of screws with recirculating balls and prismatic rails; it`s possible to shift only one fork, or both of them symmetrically. It`s provided as extra equipment; however, it has to be established along with LHD`s technical staff, since it`s not possible to install it at a later stage. The shift movement of adjusting the inter-axis is very quick and it`s programmed to occur in masked time. The ADJUSTABLE INTER-AXIS SYSTEM can be applied to all LHD telescopic forks, even to inclined forks designed for handling coils.


LHD TRANSFER System – Load up to 1000 Kg This is a compound system (telescopic forks + conveyor), designed to implement the handling functionality. With closed forks, the conveyor lifts, allowing to handle the pallet separately. The benefits of this peculiar kind of equipment are: Reduction of the cycles times within the automated warehouses, since it`s possible to set down the load in the unloading bay by means of the conveyor without using forks; Improving the positioning of the load on the shelf, since it`s possible to align the load to the forks in masked time, in order to set it down always in the same position.